German brand: German PILZ relay, German IFM sensor, German HEIDENHAIN,

Germany KUBLER encoder Germany P+F, Germany RENCON encoder

TURCH Turk, Hirschmann Industrial Switch; German Corey KER Italian GEFRAN Italian Eltron ELTRA encoder American bus de barksdale Japanese brand: Japan Omron sensor Japan God vision Japan Keenshi, Japan Opus

Japan SUMTAK encoder, Japan internal control encoder,

Inverter: Panasonic, Hitachi, Yaskawa, Danfoss, Lenz, Delta, Fuji

Electromagnetic relays are composed of iron core, coil, armature, contact reed and so on. As long as a fixed voltage is added to both ends of the coil, a fixed current will flow through the coil, resulting in electromagnetic effect. MURR relay armature will overcome the tension of the return spring and draw towards the core under the action of electromagnetic force attraction, thus driving the moving contact and static contact (normally open contact) of the armature. The use of the relay is very simple. The rated working voltage of MURR relay is the main technical parameter of relay. When using the relay, the working voltage of the circuit (that is, the circuit where the relay coil is located) should be considered. The rated working voltage of the MURR relay should be equal to the working voltage of the circuit. The working voltage of the circuit is 0.86 of the rated working voltage of the relay. The workpiece voltage of the circuit must not exceed the rated working voltage of the relay; otherwise, the relay coil will be burned down.